Bestgrip also supplies pins to stud horseshoes and nails for horses.
The tungsten pins are available in 6 different sizes, as listed in the chart below.
There are two ways in which you can use the pins. The pins can be inserted in the head of the nails to be inserted in the horseshoes, by drilling a hole with an appropriate drill tip. Alternatively, the seat for the pin can be made directly by drilling the surface of the horseshoe Once the pin is placed in the drilled hole, it must be fixed in the seat by using a hammer or a press.
A true art that is preserved by the most skilled farriers!
| Pin code | Dimensions (Upper diameter x Lower diameter x Length) |
|---|---|
| Code A | 2,9 x 3,3 x 6,5 mm |
| Code B | 2,2 x 2,5 x 5,9 mm |
| Code C1 | 4,5 x 5,0 x 9,0 mm |
| Code E1 | 1,8 x 2,3 x 5,2 mm |
| Code F | 1,8 x 2,3 x 4,2 mm |
| Code G | 3,8 x 4,3 x 9,0 mm |
Reach out to order the size that best fits your needs.
Contact us
Contact us
