HEAVY EQUIPMENT: TRUCKS, TRACTORS AND WORK MACHINES

Bestgrip products also find application on many types of heavy equipments and work machines, e.g. snow-ploughs, salt spreaders, ice shredders, forklifts, trucks, and tractors. With a very good price/quality ratio, it is possible to efficiently stud a vehicle in such a way that it can operate on ice and frost as well as in deep snow.

Bestgrip studs are made of steel and they are quenched and case-hardened. The tip of the studs is made of tungsten, and it is brazed to the body. Therefore, the Bestgrip studs provide high wear resistance, even in the harshest and most adverse conditions.

The studs listed below can support vehicles weighing up to 330 quintals, allowing them to move easily and ensuring excellent grip even in critical situations due icy roads.

Why do we prefer studs to chains?

The use of chains can damage transmissions and tyres while the continuous oscillations cause back pain to drivers. In addition, installing the chains on tyres is tiring and is only possible under certain circumstances. Instead, opting for Bestgrip studs means first and foremost to ensure full safety, as studs are installed at the beginning of winter and will only be removed when no longer needed. The vehicle is always ready to be used safely in whatever road conditions.

Ten years after the introduction of art. 1912-3, the catalogue will be enriched in September 2024 by the addition of art. 1913, a new stud with a diameter of 13 mm and 4.0 mm round head tungsten. Thanks to the larger diameter of the thread and tungsten, the stud can hold up to 330 quintals.

  • Very Efficient Nailing
    Size
    Diameter x length
    10x16.2
    Prominence
    3.2mm
    Stud penetration into the rubber
    13.0mm
    Minimum Tread
    9.0 mm
    Tip size
    3.0mm Tungsten Round Head
    Price
    € 0.70 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 150
    • Total weight: 40 quintals
    • Minimum width wedge: 14mm x 14mm
    chiave incastro

    Interlocking Key Adapter 4910
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT

  • Very Efficient Nailing
    Tempered
    Size
    Diameter x length
    10.0x12.3 mm
    Prominence
    2.8 mm
    Stud penetration into the rubber
    11.0 mm
    Minimum Tread
    8.0mm
    Tip size
    3.0 mm Tungsten Round Head
    Price
    € 0.70 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 150
    • Total weight: 45 quintals
    • Minimum width wedge: 8.0 mm x 8.0 mm
    chiave incastro

    Interlocking Key Adapter 4910
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT

  • Very Efficient Nailing
    Size
    Diameter x length
    11x22.8mm
    Prominence
    5.3mm
    Stud penetration into the rubber
    17.5mm
    Minimum Tread
    13mm
    Tip size
    3.5mm Tungsten Round Head
    Price
    € 0.76 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 150
    • Total weight: 130 quintals
    • Minimum width wedge: 15mm x 15mm
    chiave incastro

    Interlocking Key Adapter 4911-3
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT

  • Very Efficient Nailing
    Size
    Diameter x length
    11X18.6
    Prominence
    4.3mm
    Stud penetration into the rubber
    14.3mm
    Minimum Tread
    9.8mm
    Tip size
    3.5mm Tungsten Round Head
    Price
    € 0.74 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 150
    • Total weight: 90 quintals
    • Minimum width wedge: 15mm x 15mm
    chiave incastro

    Interlocking Key Adapter 4911-3
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT

  • Very Efficient Nailing
    Size
    Diameter x length
    12x24.5mm
    Prominence
    6mm
    Stud penetration into the rubber
    18.5mm
    Minimum Tread
    14mm
    Tip size
    3.5mm Tungsten Round Head
    Price
    € 0.90 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 150
    • Total weight: 200 quintals
    • Minimum width wedge: 16mm x 16mm
    chiave incastro

    Interlocking Key Adapter 4912-3
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT

  • Very Efficient Nailing
    Size
    Diameter x length
    12x20mm
    Prominence
    4.5mm
    Stud penetration into the rubber
    15.5mm
    Minimum Tread
    12.5mm
    Tip size
    3.5mm - Tungsten Round head
    Price
    € 0.83 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 150
    • Total weight: 150 quintals
    • Minimum width wedge: 16mm x 16mm
    chiave incastro

    Interlocking Key Adapter 4912-3
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT

  • Very Efficient Nailing
    Size
    Diameter x length
    10x16.2
    Prominence
    3.2mm
    Stud penetration into the rubber
    13.0mm
    Minimum Tread
    9.0 mm
    Tip size
    4.0mm Tungsteno Testa Tonda
    Price
    € 1.06 + VAT

    Use: Snow or Treaded Tires

    • Ground: Much Snow, Little Snow, Without Snow
    • Minimum quantity for each wheel: 180
    • Total weight: 40 quintals
    • Minimum width wedge: 14mm x 14mm
    chiave incastro

    Interlocking Key Adapter 4913
    Hexagonal drive use screw / handle for installation and removal
    Price: € 6.20 + VAT

    Manual handle 5000
    Hexagonal drive 1/4''
    Price: € 3.65 + VAT