More than 20 years of experience has finally resulted in Bestgrip expanding its offer with a line of mega studs, which are specifically designed for heavy vehicles operating in mines and quarries.
These types of vehicles usually are equipped with chains to minimise the risk of slipping on both gravel and icy terrain. However, chains are an expensive and impractical solution, being difficult to fit and very bulky. In addition, chains can damage the tyres and transmission of vehicles.
Using Bestgrip studs on work vehicles is an effective and efficient solution with considerable advantages, whether the ground is naturally slippery; or snowy or icy. Bestgrip Mega Stud has been designed to be used to work in extreme conditions and on heavy-weight vehicles. The studs are the largest ever made, the body of the studs is made in steel which is case-hardened and quenched. The large tip is made in tungsten and is braze-welded to the body so that it can better resist wearing.
With their size, they can be installed on vehicles up to a maximum weight of 900qt, assuring excellent road grip and safety. By choosing to use Bestgrip products, everything will become easier and more practical.
The installation of the studs is simple. It is not necessary to drill a hole before installing the stud. Once inserted, they are not bulky, for this reason they do not restrict motion.
The installation of the studs is simple. It is not necessary to drill a hole before installing the stud. Once inserted, they are not bulky, for this reason they do not restrict motion.
With the studs installed, the vehicle will always be ready to work, no matter what the weather conditions are. For the moment, there are four references for the mining nails, but the range may expand in the future to supply vehicles over 900 quintals.
Find out which stud is most suitable for your working vehicle!
Click on the image to read the specifics
Cod. Articolo: 1914
Penetration length 21.0 mm
Prominence 6.0 mm
Case-hardened and quenched
Click on the image to read the specifics
Cod. Articolo: 1914-J
Penetration length 17.0 mm
Prominence 5.5 mm
Case-hardened and quenched
Click on the image to read the specifics
Cod. Articolo: 1916
Penetration length 23.0 mm
Prominence 7.0 mm
Case-hardened and quenched
Click on the image to read the specifics
Cod. Articolo: 1916-J
Penetration length 19.0 mm
Prominence 6.0 mm
Case-hardened and quenched
1914
Efficient studding
-
Size
Diameter x length - 14.0 x 27.0mm
- Prominence
- 6.0 mm
- Penetration of the stud into the tyre
- 21.0 mm
- Minimum tread size
- 16.5mm
- Tip size
- Ø 4.5mm - Round head tungsten
- Price
- € 1.35 VAT
Use:
Snow Tyres or Knobby Tyres- Ground: Lot of snow, little snow, No snow
- Minimum quantity per tyrety 200
- Total weight 500qt
- Minimum knob size 18x18mm
Interlocking Key Adapter 4914
HEXAGONAL DRIVE for manual INSTALLATION AND REMOVAL of the studs
Price: € 6.20 + VAT
Manual handle 5000
Hexagonal drive 1/4''
Price: € 3.65 + VAT
1914-J
Efficient studding
-
Size
Diameter x length - 14.0 x 22.5mm
- Prominence
- 5.5 mm
- Penetration of the stud into the tyre
- 17.0 mm
- Minimum tread size
- 12.5mm
- Tip size
- Ø 4.5mm - Round head tungsten
- Price
- € 1.26 VAT
Use:
Snow Tyres or Knobby Tyres- Ground: Lot of snow, little snow, No snow
- Minimum quantity per tyrety 200
- Total weight 400qt
- Minimum knob size 18x18mm
Interlocking Key Adapter 4914
HEXAGONAL DRIVE for manual INSTALLATION AND REMOVAL of the studs
Price: € 6.20 + VAT
Manual handle 5000
Hexagonal drive 1/4''
Price: € 3.65 + VAT
1916
Efficient studding
-
Size
Diameter x length - 16.0 x 30.0mm
- Prominence
- 7.0 mm
- Penetration of the stud into the tyre
- 23.0 mm
- Minimum tread size
- 18.5mm
- Tip size
- Ø 4.5mm - Round head tungsten
- Price
- € 1.87 VAT
Use:
Snow Tyres or Knobby Tyres- Ground: Lot of snow, little snow, No snow
- Minimum quantity per tyrety 250
- Total weight 900qt
- Minimum knob size 20x20mm
Interlocking Key Adapter 4916
HEXAGONAL DRIVE for manual INSTALLATION AND REMOVAL of the studs
Price: € 6.20 + VAT
Manual handle 5000
Hexagonal drive 1/4''
Price: € 3.65 + VAT
1916-J
Efficient studding
-
Size
Diameter x length - 16.0 x 25.0mm
- Prominence
- 6.0 mm
- Penetration of the stud into the tyre
- 19.0 mm
- Minimum tread size
- 14.5mm
- Tip size
- Ø 4.5mm - Round head tungsten
- Price
- € 1.75 VAT
Use:
Snow Tyres or Knobby Tyres- Ground: Lot of snow, little snow, No snow
- Minimum quantity per tyrety 250
- Total weight 750qt
- Minimum knob size 20x20mm
