Assemblage Of The Clawed nail
NOTE! IS NOT NECESSARY TO PRE-DRILL HOLES IN THE FOOTWEAR
1. Place the head of the stud in the headquarters of the key provided.
2. Place the propeller of the stud on the surface of the sole of the shoes
3. Put force pushing in a longitudinal way, then screw using a manual tool
4. Tighten only until the head of the stud reaches the surface of the sole.
Stud installed correctly
Stud installed in a wrong way
Important
Do not continue to tighten, because otherwise continuous rotations of the threaded part tears, rip and wipe out the rubber, seat of the nail. The nail will be place wrong, not work properly, will bend and intend to escape.
